Wednesday, April 19, 2017

No-Tears Repair Heddle

source
So you’ve warped the loom and you’ve started to weave. Uh-oh, something is not right. You check, and sure enough, one thread is on the wrong shaft.

The only solution (other than rethreading every warp thread between the selvedge and the error) is to create a new heddle for the correct shaft and rethread the errant warp end. Some manufacturers offer steel “repair” heddles that can be clipped to shaft bars, but it’s easy to make your own by following Interweave's tips.

No comments:

Post a Comment